Mi Pro 49″ – Free Firmware Update (Patchwall + Android)
Upgrade your Mi Pro 49″ TV with the latest free firmware update to improve performance and stability.
Download Free 2022 Firmware Update
🔗 Firmware Link: Download Mi Pro 49″ Firmware (2022)
Important Notes:
✔️ Do not unzip the downloaded firmware file.
✔️ No file renaming is required.
✔️ Use a Pendrive (16GB or more) formatted as FAT32 before starting the update.
Requirements
🖥️ TV Model: Mi Pro 49″
💾 USB Storage: 16GB+ Pendrive (Formatted as FAT32)
🎮 Remote Key Combination: Press Select + Back while turning on the TV
Step-by-Step Firmware Installation Guide
1️⃣ Prepare USB Drive:
- Format your USB drive as FAT32.
- Copy the firmware update file to the USB drive (Do not extract/unzip it).
2️⃣ Connect to TV:
- Insert the USB drive into your Mi Pro 49″ TV’s USB port.
3️⃣ Enter Recovery Mode:
- Press and hold Select + Back on your TV remote.
- While holding the buttons, power on the TV.
4️⃣ Start Installation:
- The TV will detect the firmware and begin the flashing process.
- Wait patiently until the update is completed.
5️⃣ Restart & Verify:
- The TV will restart automatically after the update.
- Check the software version in settings to confirm the update was successful.
Conclusion
This free firmware update enhances the stability, performance, and user experience of the Mi Pro 49″ TV.
For further assistance, visit Mi’s official support page or community forums.
SEO Keywords:
Mi Pro 49 firmware update 2022, Mi Patchwall Android update, Mi 49-inch TV software update, Mi TV USB update, Free Mi TV firmware, Mi Pro software download, Mi TV flashing update
