🛠️ Samsung Galaxy S23 FE (SM-S711B) Test Point – EDL Mode Access Guide
Posted on April 7, 2025
If your Samsung Galaxy S23 FE (SM-S711B) is dead, stuck on boot logo, or not recognized by flashing tools, entering EDL (Emergency Download) mode using the Test Point method can help you recover and restore the device. This post provides a clean and clear Test Point diagram to assist technicians and professionals.
📌 What Is a Test Point?
A Test Point is a designated spot on a device’s motherboard used to force Qualcomm-based devices into EDL mode (9008 port), especially when:
- Bootloader is corrupted
- Device is bricked or unresponsive
- Standard recovery or fastboot mode isn’t accessible
By shorting the correct pinouts while connecting the USB cable, you can enter deep recovery mode and flash the original firmware via tools like QFIL, UMT, or Hydra.
📁 File Information
- Model: Samsung Galaxy S23 FE (SM-S711B)
- File Name: SM-S711B Test Point.rar
- File Size: 488.60 KB
- Uploaded On: April 7, 2025
- Visits: 2
- Downloads: 9662+
📥 Download Test Point File
🔗 Download SM-S711B Test Point (488.60 KB)
This archive contains a high-resolution image marking the Test Point area on the S23 FE motherboard. Use tools like WinRAR or 7-Zip to extract.
⚠️ Important Notice
- This method involves opening the phone and may void your warranty.
- Hardware-level procedures should only be done by experienced repair technicians.
- Use ESD protection to avoid short circuits or permanent damage.
🔍 SEO Tags
SM-S711B Test Point, Samsung Galaxy S23 FE EDL Mode, Samsung Unbrick Mode, Samsung Test Point Guide, QFIL Flash SM-S711B, SM-S711B Recovery, Samsung 9008 Mode, Unbrick Samsung S23 FE, Samsung Flash Port
